Medical Equipment
Rc Device V.1
Controlled Resuscitation, Lung Mechanics Display, Ventilation
RC Device provides a low-cost solution for reliable and effective ventilatory support to patients suffering from respiratory insufficiency. A user-friendly interface allows for easy setting of parameters like respiration rate and tidal volume while the inbuilt lung parameter monitoring system ensures the patient safety.
Device Feature
- Adjustable Respiration Rate [ 10– 30 BPM ]
- Adjustable Tidal Volume [ 50 – 700 mL ]
- Disconnection Alarm
- Lung Parameter Display
- PEEP [ 5 – 20 cm H2O ]
- Pressure Relief [40 – 60 cm H2O ]
- Battery Backup [4 hours].
Technical Specification
Key Ventilator Specification
| Minimum Controllable Parameters | RC Device Compliance | Remarks |
|---|---|---|
| Respiration Rate (RR) = 8 to 30 BPM | Yes | RR button on the user interface |
| Tidal Volume (TV) = 200 to 800 ml | Yes | TV button on the user interface |
| I/E Ratio = 1:2 (Better if Adjustable) | Yes | I/E button on the user interface |
| Airway Pressure Management | ||
| Maximum Pressure Limit = 40 cm | Yes | Relief valve on BVM |
| Plateau Pressure Limit = 30 cm | Yes | Needs additional attachment not in this device |
| Mechanical Pressure Relief Valve | Yes | Pressure Relief Valve is present on BVM outlet |
| Display of Plateau Pressure and PEEP | Yes | Pressure sensor module has to be separately bought |
| PEEP of 5-15 cm | Yes | Standard PEEP kit can be incorporated |
| Failure Mode Manual Override | ||
| In case of failure of automatic Ventilation, the switch over to manual Ventilation should be fast. | Yes | The device uses a silicone BVM which can be operated manually by opening the device main opening door. The whole operation of manual override takes not more than 6-8 seconds |
| Prevention against Volu-trauma | Yes | |
| Prevention against barotrauma | Yes | |
| Air Quality Control | ||
| FiO2 Adjustment | Yes | Has to be done by the trained healthcare professional |
| HEPA Filtration at Patient End | Yes | Module can be installed at BVM end of endotracheal tube |
| Heat and Moisture Control | Yes | Standard Humidifiers can be installed |
| Alarms and Notifications | ||
| Device Failure Alarm Should be Present | Yes | Alarm gets triggered in case of disconnection and internal mechanical failure. |
| Power Supply | ||
| Input: 220 V – 50 Hz – 24 W | Yes | 220 V AC to 12 V – 2 A DC |
| Backup | Yes | 4 hour Battery backup |